федеральное государственное автономное образовательное учреждение высшего образования
«Самарский национальный исследовательский университет имени академика С.П. Королева»

Khaymovich, Aleksandr I.

  • Department of Engine Production Technology, head
  • professor
  • chief researcher
  • chief researcher
2024
  • 1 Pechenina E., Pechenin V., Khaimovich A. Development of an Algorithm to Detect Components During Production // 2024 10th International Conference on Information Technology and Nanotechnology, ITNT 2024. — 2024. —
  • 2 Khaimovich A.I., Zlobin E.P., Goncharov E.S. etc. Influence of Technological Parameters of Processing of the Tumbling Machine on Quality of a Surface Layer // AIP Conference Proceedings. — 2024. — Vol. 2969. Issue 1. № 1.
2023
  • 1 Agapovichev A.V., Khaimovich A.I., Smelov V.G. etc. Multiresponse Optimization of Selective Laser Melting Parameters for the Ni-Cr-Al-Ti-Based Superalloy Using Gray Relational Analysis // Materials 2023. — Vol. 16. Issue 5. № 5.
  • 2 Shishkovsky I., Kakovkina N., Nosova E. etc. Laser In Situ Synthesis of Gradient Fe-Ti Composite during Direct Energy Deposition Process // Journal of Manufacturing and Materials Processing 2023. — Vol. 7. Issue 2. № 2.
  • 3 Oleynik M., Balyakin A., Khaimovich A. etc. Development of a calibration technique of a finite element model for calculating compensation of deformations from the action of residual stresses in additive manufacturing // E3S Web of Conferences. — 2023. — Vol. 458.
  • 4 Zlobin E.P., Khaimovich A.I., Balaykin A.V. A vibration treatment of holes obtained by selective laser melting // E3S Web of Conferences. — 2023. — Vol. 458.
  • 5 Glushchenkov V.A., Khaimovich A.I., Kolmakov A.G. etc. Effect of a Pulsed Magnetic Field on the Structure and Properties of AlSi10Mg Alloy Plates Produced by Selective Laser Melting // Russian Metallurgy (Metally) 2023. — Vol. 2023. Issue 10. № 10. — P. 1458-1461
2022
  • 1 Bobrovskij I., Khaimovich A., Bobrovskij N. etc. Derivation of the Coefficients in the Coulomb Constant Shear Friction Law from Experimental Data on the Extrusion of a Material into V-Shaped Channels with Different Convergence Angles: New Method and Algorithm // Metals 2022. — Vol. 12. Issue 2.
  • 2 Agapovichev A. V. , Khaimovich A.I., Kokareva V.V. etc. Determining Rational Technological Parameters for Selective Laser Melting of AlSi10Mg Aluminum Alloy Powder // Inorganic Materials: Applied Research 2022. — Vol. 13. Issue 2. — P. 543-548
  • 3 Bobrovskij I., Bobrovskij N., Khaimovich A. etc. Impacts of Surface Texture and Nature of Friction on Energy-Force Efficiency of Surface Plastic Deformation during Burnishing // Metals 2022. — Vol. 12. Issue 10. № 10.
  • 4 Khaimovich A., Erisov Y., Shishkovsky I. Thermodynamic Conditions for Consolidation of Dissimilar Materials in Bimetal and Functional Graded Structures // Materials 2022. — Vol. 15. Issue 3.
  • 5 Oleynik M., Khaimovich A., Balyakin A. Development of an Experimental Robotic Complex for Direct Metal Deposition and Testing of Deposition Modes for HeatResistant Powder Material // Materials Research Proceedings. — 2022. — Vol. 21. — P. 349-357
  • 6 Khaimovich A., Shishkovsky I., Erisov Y. etc. Research on Cracked Conditions in Nickel Chrome Alloy Ni50Cr33W4.5Mo2.8TiAlNb, Obtained by Direct Laser Deposition // Metals 2022. — Vol. 12. Issue 11. № 11.
  • 7 Gluschenkov V.A., Khaymovich A.I., Sargaeva Tamara Sergeevna Возможности ИМП в повышении качества изделий, полученных с помощью аддитивных технологий // 20-я Международная on-line Школа-конференция им. Б.А. Калина "Новые материалы: Перспективные технологии получения и методы исследования". — 2022. — P. 179-180
  • 8 Khaimovich A., Balyakin A., Oleynik M. etc. Optimization of Process Parameters for Powder Bed Fusion Additive Manufacturing Using a Linear Programming Method: A Conceptual Framework // Metals 2022. — Vol. 12. Issue 11. № 11.
  • 9 Khaimovich I., Khaimovich A. Optimization of wire drawing process in terms of rheological characteristics of stretching material and refinement of die hole geometry // Journal of Physics: Conference Series. — 2022. — Vol. 2373(3).
  • 10 Agapovichev A.V., Khaimovich A.I., Erisov Y.A. etc. Investigation of Soft Magnetic Material Fe-6.5Si Fracture Obtained by Additive Manufacturing // Materials 2022. — Vol. 15. Issue 24. № 24.
2021
  • 1 Khaimovich A., Erisov Y., Smelov V. etc. Interface quality indices of Al–10Si–Mg aluminum alloy and Cr18–Ni10–Ti stainless-steel bimetal fabricated via selective laser melting // Metals 2021. — Vol. 11. Issue 1. — P. 1-16
  • 2 Oleynik M., Khaimovich A., Balyakin A. Determining the optimal mode of the inconel 718 alloy deposition at a direct laser deposition plant // Materials Science Forum. — 2021. — Vol. 1037 MSF. — P. 3-12
  • 3 Khaimovich A., Erisov Y., Agapovichev A. V. etc. Practical approbation of thermodynamic criteria for the consolidation of bimetallic and functionally gradient materials // Metals 2021. — Vol. 11. Issue 12.
  • 4 Khaimovich A.I., Balyakin A.V., Shchedrin E.Y. etc. Influence of the fusion modes on the microstructure and formation of defects in samples made of a heat-resistant nickel-based alloy made by direct laser fusion // AIP Conference Proceedings. — 2021. — Vol. 2402.
2020
  • 1 Khaimovich I.N., Khaimovich A.I., Kovalkova E.A. Аutomatisation of Calculation Method of Technological Parameters of Wiredrawing with Account of Speed Factor and Material Properties // Solid State Phenomena. — 2020. — Vol. 299 SSP. — P. 552-558
  • 2 Khaimovich A.I., Bobrovskii N.M., Luk’yanov A.A. etc. Heat Propagation in Deformable Polycrystalline Metals with Grain-Size Variation // Russian Engineering Research 2020. — Vol. 40. Issue 11. — P. 966-969
  • 3 Bobrovskij I., Khaimovich A., Bobrovskij N. etc. Determination of wide burnishing energy-force parameters based on constructing the kinematically admissible velocity field // Metals 2020. — Vol. 10. Issue 1.
2019
  • 1 Abulkhanov S., Khaimovich A., Polyanskov Y. etc. Analytical approach in determination of the surface layer parameters of machine parts hardened by a moving elastic indenter // Journal of Physics: Conference Series. — 2019. — Vol. 1399. Issue 5.
  • 2 Bobrovskij S., Gorshkov B., Zaides S. etc. Analysis of research in the field of automatic production systems with rigid interaggregate relation and recomposed systems // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 537. Issue 3.
  • 3 Khaimovich A., Erisov Y., Surudin S. etc. The method for determining the friction coefficient in relation to the hot forging processes // Key Engineering Materials 2019. — Vol. 822. — P. 137-143
  • 4 Nosov N., Bobrovskij S., Levitskih O. etc. Method of determining the parameters of the texture of the surface of the rolls of rolling bearings by means of quasi-optimal correlation algorithm // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 537. Issue 4.
  • 5 Abulkhanov S., Khaimovich A., Leonid K. etc. Problem formulation of analytical characterization of part surface layer hardened by a moving elastic indenter // Journal of Physics: Conference Series. — 2019. — Vol. 1399. Issue 2.
  • 6 Bobrovskij S., Gorshkov B., Zaides S. etc. Working position with recomposed production systems: Devices // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 537. Issue 2.
  • 7 Khaimovich A., Agapovichev A. V. , Sotov A. V. etc. Research study of residual stress during Ni-Co-Cr alloy selective laser melting process // Materials Today: Proceedings. — 2019. — Vol. 19. — P. 2454-2457
  • 8 Nosov N., Bobrovskij S., Levitskih O. etc. Study of defects of the surface of rolls of rolling bearings under grinding // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 537. Issue 3.
  • 9 Ermakov B., Vologzhanina S., Bobrovskij S. etc. Decrease in mechanical properties, transient brittleness temperature, fatigue strength and corrosion resistance of Fe-C alloys // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 537. Issue 2.
2018
  • 1 Khaimovich A.I., Stepanenko I.S., Smelov V.G. Optimization of Selective Laser Melting by Evaluation Method of Multiple Quality Characteristics // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
  • 2 Khaimovich A.I., Khaimovich I.N. Methods and Algorithms for Computer-aided Engineering of Die Tooling of Compressor Blades from Titanium Alloy // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
  • 3 Stepanenko I.S., Pechenin V.A., Ruzanov N.V. etc. Technique of increasing the accuracy of GTE parts manufactured by selective laser melting // Journal of Physics: Conference Series. — 2018. — Vol. 1096. Issue 1.
2017
  • 1 Abul'hanov S.R., Skuratov D. L. , Khaimovich A.I. Correlation image analysis of surface roughness // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 296-304
  • 2 Grechnikov F.V., Khaimovich A.I., Mikhelkevich V. etc. The research of friction influences on the formation process by lateral extrusion into radial wedge-type branches // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 56-62
  • 3 Khaymovich A.I., Prokhorov S. A. , Stolbova A.A. etc. A model of milling process based on Morlet wavelets decomposition of vibroacoustic signals // CEUR Workshop Proceedings. — 2017. — Vol. 1904. — P. 135-140
  • 4 Stepanenko I.S., Khaimovich A.I. GTE blade injection moulding modeling and verification of models during process approbation // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 177. Issue 1.
  • 5 Pechenin V.A., Khaimovich A.I., Kondratiev A.I. etc. Method of Controlling Cutting Tool Wear Based on Signal Analysis of Acoustic Emission for Milling // Procedia Engineering. — 2017. — Vol. 176. — P. 246-252
  • 6 Ponyatov D.S., Alekseev V.P., Khaimovich A.I. The study of the process of chip segmentation in case of edge cutting machining of titanium alloy // MATEC Web of Conferences. — 2017. — Vol. 129.
  • 7 Khaimovich A.I., Skuratov D. L. New damage criteria for machining considering contact friction for FE analysis // Key Engineering Materials. — 2017. — Vol. 736 KEM. — P. 147-152
  • 8 Kozlovskiy V.N., Sedelnikov A.V., Khaimovich A.I. etc. Проблемы и перспективы развития системы мониторинга показателей качества автомобилей в эксплуатации // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1. Pt. 1. — P. 31-39
  • 9 Khaimovich I.N., Khaimovich A.I. Computer-aided engineering of the process of injection molding articles made of composite materials // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 269-274
  • 10 Alexeev V.P., Balyakin A.V., Khaimovich A.I. Influence of the direction of selective laser sintering on machinability of parts from 316L steel // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 177. Issue 1.
2016
  • 1 Grechnikov F.V., Khaimovich A.I. Raising the fatigue resistance of titanium alloys by high-speed deformation in the range of polymorphic transformations // Metal science and heat treatment 2016. — Vol. 57. Issue 11-12. — P. 726-730
  • 2 Khaimovich A.I., Balaykin A.V., Galkina N.V. Phenomenological modeling of rheological properties of polyetheretherketones reinforced with high modulus carbon in the machining process by a reversible analysis method // Key Engineering Materials. — 2016. — Vol. 685. — P. 119-123
  • 3 Khaimovich I.N., Surkov O.S., Khaimovich A.I. Practice in the application of specialized technologic process patterns of 5-axis machining operation of blade rings of blisks // Russian Aeronautics 2016. — Vol. 59. Issue 1. — P. 112-117
  • 4 Grechnikov F., Khaimovich A. The study of plastic deformation at high strain rates in upset forging of cylinders // Key Engineering Materials. — 2016. — Vol. 684. — P. 74-79
  • 5 Alekseev V.P., Khaimovich A.I. Testing criterion models of destruction of materials with different rheological properties under edge cutting machining // Key Engineering Materials. — 2016. — Vol. 684. — P. 13-20
  • 6 Kazanskiy N.L., Stepanenko I.S., Khaimovich A.I. etc. Injectional multilens molding parameters optimization // Computer Optics 2016. — Vol. 40. Issue 2. — P. 203-214
  • 7 Kazanskiy N.L., Stepanenko I.S., Khaymovich A.I. etc. Оптимизация параметров инжекционного литья мультилинз из термопластичных полимеров // Computer Optics 2016. — Vol. 40. № 2. — P. 203-214
  • 8 Grechnikov F., Khaimovich A., Alexandrov S. Estimation of hot stamping lubricant efficiency under dynamic loading conditions // Journal of Materials Processing Technology 2016. — Vol. 234. — P. 300-308
2015
  • 1 Kostyshev V. A. , Khaimovich A.I. Analytical modeling of the microstructure evolution of titanium alloys during high-speed stamping of the blades of gas-turbine engines // Russian journal of non-ferrous metals 2015. — Vol. 56. Issue 2. — P. 181-189
  • 2 Alexander I. Khaimovich, Andrey V. Balaykin, Natalia V. Galkina Study of Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD // Applied Mechanics and Materials 2015. — № V. 756. — P. 120-125
  • 3 A.I. Khaimovich, A.V. Balaykin, Galkina N.V. Study of the Rheological Properties of Materials at the Blade Processing on Example of Milling Nickel-Chromium Alloy 10H11N23T3 MR VD // Applied Mechanics and Materials 2015. — № V. 756. — P. 120-126
  • 4 Stepanov A.A., Khaimovich A.I. Stress–strain state of the tool and part in broaching // Russian Engineering Research 2015. — Vol. 35. Issue 7. — P. 541-543
  • 5 Grechnikov F.V., Khaimovich A.I. Development of the requirements template for the information support system in the context of developing new materials involving Big Data // CEUR Workshop Proceedings. — 2015. — Vol. 1490. — P. 364-375
  • 6 Khaimovich A.I., Stepanov A.A. Automated calculation of broaching parameters // Russian Engineering Research 2015. — Vol. 35. Issue 8. — P. 615-616
  • 7 Stepanov A.A., Khaimovich A.I. Dynamic cutting // Russian Engineering Research 2015. — Vol. 35. Issue 8. — P. 635-638
2014
  • 1 KOSTYShEV V.A., HAIMOVICH A.I. Анализ эволюции микроструктуры титанового сплава ВТ9 при высокоскоростной штамповке лопаток ГТД на основе аналитического моделирования // Proceedings of the Symposium on New materials, advanced technology metallurgy April 16 2014. — № 1. — P. 1-15
  • 2 Khaimovich A.I., Balaykin A.V. Analysis of titanium alloys plastic properties under severe deformation conditions in machining // ARPN Journal of Engineering and Applied sciences 2014. — Vol. 9. Issue 10. — P. 1828-1833
  • 3 Khaimovich A.I., Abulhanov S.R. Equations of state of plastically deformed polycrystalline medium considering plastic deformation thermal effect // ARPN Journal of Engineering and Applied sciences 2014. — Vol. 9. Issue 12. — P. 2867-2875
  • 4 Khaimovich A.I., Balaykin A.V. Analysis of plastic properties of titanium alloys under severe deformation conditions in machining // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2184-2190
  • 5 Abulkhanov S.R., Skuratov D. L. , Khaimovich A.I. etc. Analytical approach to determining of parameters which characterize surface layer quality of the parts hardened by a traveling diamond sphere // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2191-2200
  • 6 Khaimovich A.I., Balaykin A.V., Kondratiev A.I. Methodology of rheological material properties phenoinenological modeling at high speed cutting by reverse analysis // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 11. — P. 753-760