федеральное государственное автономное образовательное учреждение высшего образования
«Самарский национальный исследовательский университет имени академика С.П. Королева»

Abulkhanov, Stanislav R.

  • Department of Engine Production Technology, associate professor
2024
  • 1 Abul’khanov S.R. Predicting the development of an observed process from its digital image // Proceedings of SPIE - The International Society for Optical Engineering. — 2024. — Vol. 13168.
2023
  • 1 Abulkhanov S.R., Goryainov D.S. Parametrization of nonuniform brightness of the light flux of a lighting device operated in vibrating conditions // Proceedings of SPIE - The International Society for Optical Engineering. — 2023. — Vol. 12743.
2021
  • 1 Abulkhanov S.R., Slesarev O.V., Strelkov Yu.S. etc. Technology for high-sensitivity analysis of medical diagnostic images // Sovremennye Tehnologii v Medicine 2021. — Vol. 13. Issue 2. — P. 6-17
2020
  • 1 Abul'Khanov S.R., Bairikov I.M., Slesarev O.V. etc. Highly sensitive method for remote analysis of diagnostic images // Proceedings of SPIE - The International Society for Optical Engineering. — 2020. — Vol. 11516.
  • 2 Abulkhanov S., Bairikov I., Goryainov D. etc. Cellular titanium implant for jaw bone defect replacement // Proceedings of ITNT 2020 - 6th IEEE International Conference on Information Technology and Nanotechnology. — 2020. —
  • 3 Abulkhanov S., Goryainov D., Strelkov Y. The effect of vibration on the performance of lighting devices // 2020 International Conference on Dynamics and Vibroacoustics of Machines, DVM 2020. — 2020. —
2019
  • 1 Abulkhanov S.R., Ivliev N.A. Optical inspection device for the inner surface of pipe ends // Journal of Physics: Conference Series. — 2019. — Vol. 1368. Issue 2.
  • 2 Abulkhanov S.R., Surkov O.S. Use of a vertebra digital model for an implant design // Journal of Physics: Conference Series. — 2019. — Vol. 1368. Issue 5.
  • 3 Abulkhanov S.R., Poletaev S.D. Development of virtual roughness comparators // Journal of Physics: Conference Series. — 2019. — Vol. 1368. Issue 2.
  • 4 Abulkhanov S., Khaimovich A., Leonid K. etc. Problem formulation of analytical characterization of part surface layer hardened by a moving elastic indenter // Journal of Physics: Conference Series. — 2019. — Vol. 1399. Issue 2.
  • 5 Abulkhanov S., Khaimovich A., Polyanskov Y. etc. Analytical approach in determination of the surface layer parameters of machine parts hardened by a moving elastic indenter // Journal of Physics: Conference Series. — 2019. — Vol. 1399. Issue 5.
2018
  • 1 Kazanskiy N.L., Abulkhanov S.R., Goryainov D.S. etc. Analysis of structural features of a LED searchlight // Journal of Physics: Conference Series. — 2018. — Vol. 1096. Issue 1.
  • 2 Abul'Khanov S.R., Kazanskiy N.L. Information Pattern in Imaging of a Rough Surface // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
2017
  • 1 Abulkhanov S.R., Goryainov D.S. Design peculiarities of light-emitting diode devices // Procedia Engineering. — 2017. — Vol. 201. — P. 90-99
  • 2 Slesarev O., Bayricov I., Trunin D. etc. Influence of data visualization of temporomandibular joint on the formation of clinical groups // RAD Conference Proceedings. — 2017. — Vol. 2. — P. 212-216
  • 3 Abulhanov S.R., Popov S.B., Ivliev N.A. etc. Device for Control of Apertures Surface of Pipes of Oil Assortment // Procedia Engineering. — 2017. — Vol. 176. — P. 645-652
  • 4 Abulkhanov S.R., Kazanskiy N.L., Strelkov Y.S. Numerical simulation of vibrationrelated deformation of a railway locomotive headlight: Visualization of the results // Scientific Visualization 2017. — Vol. 9. Issue 5. — P. 19-37
  • 5 Abul'hanov S.R., Skuratov D. L. , Khaimovich A.I. Correlation image analysis of surface roughness // Key Engineering Materials. — 2017. — Vol. 746 KEM. — P. 296-304
2016
  • 1 Abulkhanov S.R., Goryainov D.S. Upgraded railway front searchlight design plastic deformations by its vibrations with resonance frequencies // Key Engineering Materials. — 2016. — Vol. 684. — P. 111-119
  • 2 Abulkhanov S.R., Goryainov D.S. Innovative applications of acoustic waves focusators // CEUR Workshop Proceedings. — 2016. — Vol. 1638. — P. 173-184
  • 3 Abulkhanov S.R., Skuratov D. L. , Shvetcov A.N. Characterization analytic method specifying the steel x10crniti18-10 cylinder surface layer quality hardened by a traveling sphere // Key Engineering Materials. — 2016. — Vol. 684. — P. 387-397
  • 4 Abulkhanov S.R., Kharitonov S.I. An information-measuring system for evaluating performance parameters of lighting devices // Proceedings of SPIE - The International Society for Optical Engineering. — 2016. — Vol. 9807.
2015
  • 1 Abul’khanov S.R., Goryainov D.S., Skuratov D. L. etc. Formation of the surface layer in diamond smoothing // Russian Engineering Research 2015. — Vol. 35. Issue 2. — P. 147-149
  • 2 Abulkhanov S.R., Skuratov D. L. Vibration resistance of headlamp design with light emitting diodes for electric locomotive // CEUR Workshop Proceedings. — 2015. — Vol. 1490. — P. 122-132
  • 3 Abulkhanov S.R. Vibration resistance of headlight design for electric locomotive // CEUR Workshop Proceedings. — 2015. — Vol. 1490. — P. 112-121
2014
  • 1 Abul'Khanov S.R. Technological applications of focusing optical elements // Proceedings of SPIE - The International Society for Optical Engineering. — 2014. — Vol. 9533.
  • 2 Abul'khanov S.R. Technologies of laser radiation focusators // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 11. — P. 834-842
  • 3 Khaimovich A.I., Abulhanov S.R. Equations of state of plastically deformed polycrystalline medium considering plastic deformation thermal effect // ARPN Journal of Engineering and Applied sciences 2014. — Vol. 9. Issue 12. — P. 2867-2875
  • 4 Abulkhanov S.R., Skuratov D. L. , Khaimovich A.I. etc. Analytical approach to determining of parameters which characterize surface layer quality of the parts hardened by a traveling diamond sphere // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2191-2200
2011
  • 1 Abul'khanov S.R., Kazanskii N.L., Doskolovich L.L. etc. Manufacture of diffractive optical elements by cutting on numerically controlled machine tools // Russian Engineering Research 2011. — Vol. 31. Issue 12. — P. 1268-1272
1991
  • 1 Abul'khanov S.P. Analytical condition for advanced crack formation during microcutting // Sverkhtverdye Materialy 1991. — Issue 6. — P. 62