Baturin, Oleg V.

2024

• 1 Matveev V.N., Popov G.M., Goriachkin E.S. etc. Algorithm of Forming the Appearance of the Flow Path of Turbomachinery of Two-Shaft Aircraft Engine Core // Proceedings of the 19th International Conference on Software Technologies, ICSOFT 2024. — 2024. — P. 223-228
• 2 Liu X., Baturin O., Popov G. Research on Multifactor Analysis Method for Thermodynamic Calculation of Turbofan Engine // ACM International Conference Proceeding Series. — 2024. — P. 171-176
• 3 Baturin O.V., Gataullina E.D., Goryachkin E.S. etc. Regression Equations for Preliminary Dimensioning of Axial Compressor Discs // Proceedings of the 19th International Conference on Software Technologies, ICSOFT 2024. — 2024. — P. 237-241
• 4 Popov G.M., Zubanov V.M., Baturin O.V. etc. Linked multidisciplinary optimisation of a twin-shaft turbine of a promising turboshaft engine // Journal of Physics: Conference Series. — 2024. — Vol. 2784. Issue 1. № 1.

2023

• 1 Matveev V.N., Goriachkin E.S., Popov G.M. etc. The features of design calculation stages of parameters of flow path of cascade compressor of twin shaft gas turbine engine core on base of 1d and 2d dimensional models of their working process // Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2023. — Vol. 1. — P. 225-233
• 2 Lyu S., Baturin O.V., Melnikov S.A. etc. Research on Thermal State Optimization of High Pressure Turbine 1st Stage Rotor Blade // Международная научно-техническая конференция имени Н.Д. Кузнецова "Перспективы развития двигателестроения". — 2023. — Vol. 2. — P. 112-113
• 3 Lo D., Baturin O.V., May S. etc. A rapid preliminary disk design method for two-dimensional aero engine scheme design // Международная научно-техническая конференция имени Н.Д. Кузнецова «Перспективы развития двигателестроения». . — 2023. — Vol. 1. — P. 13-15
• 4 Volkov A., Matveev V., Baturin O. etc. Finding Recommendations for Selecting Numerical Model Settings for Efficient Simulation of the Working Process of an Axial Turbine Blade with Convective Cooling // Lecture Notes in Mechanical Engineering. — 2023. — P. 37-55

2022

• 1 Popov G.M., Volkov A.A., Baturin O.V. etc. Numerical Model of the Axial Turbine Blade Cooling Process // GPPS Xi'an21. — 2022. —
• 2 Volkov A., Zubanov V., Matveev V. etc. Rational Settings of a Numerical Model to Simulate the Working Process of an Axial-Film-Cooled Turbine Blade // International Journal of Mechanical Engineering and Robotics Research 2022. — Vol. 11. Issue 12. № 12. — P. 901-907
• 3 Popov G., Egorov I., Goriachkin E. etc. Optimization Method of the Multistage Axial Compressors Using CFD Simulation // International Journal of Computational Methods 2022. —
• 4 Popov G.M., Goryachkin E.S., Baturin O.V. etc. Aerodynamic and strength improvement of the axial turbine of a helicopter GTE // GPPS Xi'an21. — 2022. —
• 5 Popov Grigoriy Mikhaylovich, Mikheev M.G. , Baturin O.V. etc. Aerodynamic Improvement Of The 16-Stage Axial Compressor // GPPS Xi’an21. — 2022. —
• 6 Samara I.E., Tochyonov V., Baturin O. etc. Optimization of the Fan Parameters to Increase the Cooling Efficiency of the Engine Radiator // Proceedings - 2022 Power System and Green Energy Conference, PSGEC 2022. — 2022. — P. 1030-1037
• 7 Baturin O.V., Lyu Ch., Sun P. etc. Educational Optimization Software for Axial Compressor Flow Path Design // 2022 IEEE 5th International Conference on Electronics Technology, ICET 2022. — 2022. — P. 381-385
• 8 Baturin O.V., Paúl Nicolalde, Popov G.M. etc. Calculating the parameters of a gas turbine engine taking into account the uncertainty of the initial data // GPPS Xi’an21 . — 2022. —

2021

• 1 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Multidisciplinary optimization of a helicopter GTE Turbine // AIAA Propulsion and Energy Forum, 2021. — 2021. —
• 2 Popov G.M., Novikova Y.D., Goryachkin E.S. etc. Design and Development of a Pneumatic Braking Device for Testing the Gas Turbine Plant // Russian Aeronautics 2021. — Vol. 64. Issue 1. — P. 52-60
• 3 Popov G., Goriachkin E., Egorov I. etc. Improvement of aerodynamic and strength characteristics of a multi-shaft axial turbine of a turboshaft engine // Proceedings of the ASME Turbo Expo. — 2021. — Vol. 2D-2021.
• 4 Popov G.M., Zubanov V.M., Novikova Y.D. etc. A method for checking the possibility of joint work of the auxiliary power unit and the starter // Journal of Physics: Conference Series. — 2021. — Vol. 1891. Issue 1.
• 5 Popov G., Miheev M., Zubanov V. etc. Improvement of the aerodynamic parameters of a 16-stage axial compressor for industrial gas turbine power unit // AIAA Propulsion and Energy Forum, 2021. — 2021. —
• 6 Baturin O.V., Nicolalde P., Tkachenko A.U. etc. Calculation of GTE Parameters Taking the Uncertainty of the Initial Data and Verification of Stochastic Results into Account // 2021 International Scientific and Technical Engine Conference (EC). — 2021. — P. 1-7
• 7 Baturin O., Popov G., Nicolalde P. etc. IDENTIFICATION of the MATHEMATICAL MODEL of A GAS TURBINE ENGINE TAKING into ACCOUNT the UNCERTAINTY of the INITIAL DATA // Proceedings of ASME 2021 Gas Turbine India Conference, GTINDIA 2021. — 2021. —
• 8 Prokofiev A.B., Baturin O.V., Popov G.M. etc. Improving the performance of a two-stage centrifugal pump by optimizing its flowpath // AIP Conference Proceedings. — 2021. — Vol. 2351.
• 9 Popov G.M., Volkov A.A., Kudryashov I.A. etc. Search for Rational Settings of a Numerical Model of for Studying Film Cooling in Axial Turbines // 2021 International Scientific and Technical Engine Conference (EC). — 2021. — P. 1-5
• 10 Popov G.M., Goriachkin E.S., Baturin O.V. etc. Joint aerodynamics and strength optimization of a single-stage uncooled turbine with a shroud platform // 2021 International Scientific and Technical Engine Conference (EC). — 2021. — P. 1-8
• 11 Popov G., Miheev M., Vorobyev A. etc. COMPREHENSIVE PERFORMANCE IMPROVEMENT for A 16-STAGE AXIAL COMPRESSOR // Proceedings of the ASME Turbo Expo. — 2021. — Vol. 2A-2021.

2020

• 1 Popov G., Goriachkin E., Baturin O. etc. Optimization of the workflow of multistage axial compressors using modern gas dynamics computing systems // Proceedings of the ASME Turbo Expo. — 2020. — Vol. 2D-2020.
• 2 Popov Grigoriy Mikhaylovich, Zubanov V.M., Matveev V.N. etc. Метод согласования совместной работы воздушного стартера и вспомогательной силовой установки // Вестник ПНИПУ. Аэрокосмическая техника 2020. — № 63. — P. 5-13
• 3 Popov G., Zubanov V., Baturin O. etc. Optimization of an air turbo starter considering its joint work with an auxiliary power unit // Proceedings of the ASME Turbo Expo. — 2020. — Vol. 2C-2020.
• 4 Popov G., Baturin O., Goriachkin E. etc. Axial compressor optimization method // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 904. Issue 1.
• 5 Popov G.M., Baturin O.V., Zubanov V.M. etc. The method of matching the joint work of the auxiliary power unit and turbostarter and determining the start time of the gas turbine engine // AIAA Propulsion and Energy 2020 Forum. — 2020. — P. 1-10
• 6 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Optimization algorithm for axial multistage compressor workflow // AIAA Propulsion and Energy 2020 Forum. — 2020. — P. 1-11
• 7 Goriachkin E., Popov G., Baturin O. etc. Method for improving multi-stage compressor parameters using the IOSO optimizer // SIMULTECH 2020 - Proceedings of the 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2020. — P. 163-170
• 8 Popov G., Baturin O., Zubanov V. etc. Optimization of a single-stage air starter turbine // SIMULTECH 2020 - Proceedings of the 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2020. — P. 155-162

2019

• 1 Baturin O., Kolmakova D. A. , Popov G. etc. Reducing the hydraulic resistance in the inlet device of the gas turbine unit // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 88-99
• 2 Popov G., Volkov A. A. , Goriachkin E. etc. NLH calculation of the influence the inlet nonuniformity on the fan parameters // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 643. Issue 1.
• 3 Baturin O., Krivtsov A., Kolmakova D. A. etc. Estimation of the hydraulic losses in the work shaft of a gas turbine engine of a gas compressor unit under various operating conditions // Proceedings of the ASME Turbo Expo. — 2019. — Vol. 3.
• 4 Marchukov E., Egorov I., Popov G. etc. Creating a multi-level model of a centrifugal compressor for a digital analogue of the gas turbine engine // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 604. Issue 1.
• 5 Marchukov E., Egorov I., Popov G. etc. Optimization of a three spool axial compressor to increase the efficiency of a gas turbine engine // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 604. Issue 1.
• 6 Egorov I., Marchukov E., Volkov A. A. etc. The concept of obtaining reliable compressor characteristics based on a multilevel mathematical model with a two-stage identification // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —
• 7 Baturin O.V., Kolmakova D. A. , Krivtsov A.V. etc. Estimation of the hydraulic losses in the inlet shaft of a land-based gas turbine // ASME 2019 Gas Turbine India Conference, GTINDIA 2019. — 2019. — Vol. 2.
• 8 Popov G., Baturin O., Volkov A. A. etc. The influence of the level of the flow path blockage at the inlet on the fan characteristics // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 247-254
• 9 Marchukov E., Egorov I., Baturin O. etc. Multi-level "Learnable" Model of the workflow in the centrifugal compressor stage // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 100-110
• 10 Popov G.M., Egorov I., Marchukov E. etc. The concept of a multi-level optimization model of the centrifugal compressor workflow // ASME 2019 Gas Turbine India Conference, GTINDIA 2019. — 2019. — Vol. 1.
• 11 Egorov I., Volkov A. A. , Popov G. etc. Multi-level model of the centrifugal compressor workflow for its effective optimization // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 643. Issue 1.
• 12 Baturin O., Krivcov A. V. , Kolmakova D. A. etc. Modeling, Analysis and Improvement of the Input Cleaning Device of a Gas Turbine Plant for Pumping Gas // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 365-369
• 13 Popov G.M., Baturin O.V., Novikova Y.D. etc. Estimation of the influence of the inlet nonuniformity on the performance of a fan of a turbofan engine // ASME 2019 Gas Turbine India Conference, GTINDIA 2019. — 2019. — Vol. 1.
• 14 Marchukov E., Egorov I., Popov G. etc. Concept Development and Approbation of a Multi-Level Model of the Centrifugal Compressor Workflow for Quick Obtaining the Reliable Characteristics in Optimization Tasks // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 514-518
• 15 Baturin O., Kolmakova D. A. , Krivcov A. V. etc. Estimation of the hydraulic losses in the work shaft of a gas turbine engine of a gas compressor unit under various operating conditions // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —

2018

• 1 Zubanov V., Volkov A. A. , Matveev V. etc. Optimization of fuel two-stage screw centrifugal pump of rocket powerful turbopump unit // Proceedings of the ASME Turbo Expo. — 2018. — Vol. 2B-2018.
• 2 Popov G., Matveev V., Baturin O. etc. Estimation of the effect of 3d grid parameters on the simulation of the working process of axial turbines // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 371-377
• 3 Popov G., Matveev V., Baturin O. etc. Selection of Parameters for Blade-To-blade Finite-volume Mesh for CFD Simulation of Axial Turbines // MATEC Web of Conferences. — 2018. — Vol. 220.
• 4 Baturin O., Kolmakova D. A. , Popov G. etc. Improving the characteristics of two-stage fuel pump by optimizing the blades geometry // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 357-364
• 5 Baturin O.V., Biyuk V.V., Zvyagintsev V.A. etc. Investigation of possibility to use industrial high pressure fan as steam compressor for distillation desalination plant // Journal of Physics: Conference Series. — 2018. — Vol. 1111. Issue 1.
• 6 Matveev V., Baturin O., Popov G. The Optimization of Four-Stage Low Pressure Turbine with Outlet Guide Vane // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
• 7 Popov G., Matveev V., Baturin O. etc. Selection of Parameters for 3D Finite-volume Mesh for CFD Simulation of Axial Turbines // MATEC Web of Conferences. — 2018. — Vol. 220.
• 8 Baturin O., Popov G., Kolmakova D. A. etc. Optimization of Powerful Two-stage Screw Centrifugal Pump // MATEC Web of Conferences. — 2018. — Vol. 220.
• 9 Baturin O., Kolmakova D. A. Development of A New Equations Describing Profile Losses in Axial Turbine Blade Row // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.

2017

• 1 Baturin O.V., Gorshkov A.Yu., Popov G.M. etc. Выбор модели для оценки профильных потерь в лопаточном венце с помощью методов математической статистики // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1 (2). — P. 319-324
• 2 Baturin O.V., Popov G.M., Kolmakova D. A. etc. Strength and gas dynamic methods of development of the axial turbine turbocharger // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 3 Baturin O., Popov G., Novikova J. etc. Strength and gas dynamic methods of development of axial turbine turbocharger // 2017 International Conference on Mechanical, System and Control Engineering, ICMSC 2017. — 2017. — P. 44-47
• 4 Baturin O.V., Popov G.M., Kolmakova D. A. etc. The best model for the calculation of profile losses in the axial turbine // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 5 Baturin O.V., Popov G.M., Goryachkin E.S. etc. Optimization of the working process of the axial compressor according to the criterion of efficiency // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 6 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Оптимизация рабочего процесса осевой неохлаждаемой турбины с использованием решателя 3D уравнений Навье-Стокса // Известия Самарского научного центра РАН 2017. — Vol. 19. № 1. — P. 107-115
• 7 Novikova Y., Popov G., Goriachkin E. etc. The process of gas-dynamic design of pneumatic braking system using the baseline compressor // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.
• 8 Popov G.M., Novikova Y.D., Goryachkin E.S. etc. Using of low-pressure compressor to design the concept of the air brake system // AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting. — 2017. —
• 9 Matveev V., Baturin O., Kolmakova D. A. etc. Reduction of gas flow nonuniformity in gas turbine engines by means of gas-dynamic methods // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.
• 10 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Increasing the efficiency of the axial low pressure compressor in three operation modes by optimizing the shape of its blades // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 11 Baturin O., Tkachenko A., Krupenich I. N. etc. Identifying the approach to significantly improve the performance of NK-36ST gas turbine power plant // Proceedings of the ASME Turbo Expo. — 2017. — Vol. 3.
• 12 Marchukov E., Egorov I., Popov G. etc. Improving of the working process of axial compressors of gas turbine engines by using an optimization method // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.
• 13 Matveev V., Novikova Y., Popov G. etc. Design and operational development a pneumatic braking system for a gas-turbine units test bench // Proceedings of the ASME Turbo Expo. — 2017. — Vol. 2B-2017.
• 14 Matveev V.N., Baturin O.V., Kolmakova D. A. etc. Gas dynamic improvement of the axial compressor design for reduction of the flow non-uniformity level // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.

2016

• 1 Baturin O., Kolmakova D. A. , Gorshkov A. etc. Generation of the equations for the profile losses calculation in blade row of axial turbines in design analysis // Proceedings of the ASME Turbo Expo. — 2016. — Vol. 2C-2016.
• 2 Kolmakova D.A., O. V. Baturin Impact of Geometric Uncertainties on the Results of Numerical Simulation of Axial Turbine Operation // The Fourth International Academic Conference for Graduates. — 2016. — Pt. 2. — P. 44-49

2015

• 1 Kolmakova D. A. , Popov G., Baturin O. etc. The quantification of impact of geometrical and operational parameters uncertainty on the numerical simulation results of axial turbine working process // Proceedings of the ASME Turbo Expo. — 2015. — Vol. 2B.
• 2 Matveev V. N., Baturin O. V., Popov G. M. etc. ОПТИМИЗАЦИЯ РАБОЧЕГО ПРОЦЕССА МНОГОСТУПЕНЧАТЫХ ОСЕВЫХ ТУРБИН С БАНДАЖНЫМИ ПОЛКАМИ // Vestnik of the Samara State Aerospace University 2015. — № Том 14, № 3, ч. 2. — P. 271-283
• 3 Baturin O., Kolmakova D. A. , Gorshkov A. etc. Selection of models to assess the profile losses in blade rows using the methods of mathematical statistics // ASME 2015 Gas Turbine India Conference, GTINDIA 2015. — 2015. —
• 4 Matveev V.N., Popov G.M., Baturin O.V. etc. Workflow optimization of multistage axial turbine // 51st AIAA/SAE/ASEE Joint Propulsion Conference. — 2015. —
• 5 Matveev V.N., Popov G.M., Baturin O.V. etc. Workflow optimization of multistage axial turbine // 51st AIAA/SAE/ASEE Joint Propulsion Conference. — 2015. —
• 6 Goryachkin E., Baturin O., Popov G. etc. Three-stage low pressure compressor modernization by means of optimization methods // Proceedings of the ASME Turbo Expo. — 2015. — Vol. 2C.
• 7 Baturin O.V., Popov G.M., Goryachkin E.S. etc. Application of 3D navier-stokes equations and mathematical optimization techniques to improve the efficiency of seven-stage axial compressor // SIMULTECH 2015 - 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Proceedings. — 2015. — P. 227-232

2014

• 1 Popov G.M., Baturin O.V., Kolmakova D. A. etc. Improvement results of TK-32 turbocompressor turbine with gas-dynamics and strength CAE-systems // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2297-2303
• 2 Matveev V.N., Baturin O.V., Popov G.M. etc. Seven-stage axial compressor optimization // Engineering Optimization IV - Proceedings of the 4th International Conference on Engineering Optimization, ENGOPT 2014. — 2014. — P. 821-826
• 3 Kolmakova D. A. , Baturin O., Popov G. Effect of manufacturing tolerances on the turbine blades // In Proceedings of the ASME 2014 Gas Turbine India Conference GTINDIA2014. — 2014. —
• 4 Krivcov A. V. , Shabliy L.S., Baturin O.V. Gas-dynamic modeling of gas turbine engine components collaborative workflow // Open Mechanical Engineering Journal 2014. — Vol. 8. — P. 445-449
• 5 Shabliy L., Krivcov A. V. , Baturin O. Separated computation of the whole jet engine workflow // SIMULTECH 2014 - Proceedings of the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2014. — Vol. 2014-January. — P. 274-279
• 6 Krivcov A. V. , Shabliy L., Baturin O. Account the mutual influence of the simulation components of GTE // ASME 2014 Gas Turbine India Conference, GTINDIA 2014. — 2014. —
• 7 Kolmakova D. A. , Baturin O.V., Popov G.M. Knowledge lack impact assessment of the source date on numerical simulation results of operational process in axial flow turbine blade row // ARPN Journal of Engineering and Applied sciences 2014. — Vol. 9. Issue 12. — P. 2880-2889
• 8 Popov G.M., Goryachkin E.S., Baturin O.V. etc. Development of recommendations on building of the lightweight calculation mathematical models of the axial turbines of gas turbine engines // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2236-2243
• 9 Matveev V.N., Baturin O.V., Popov G.M. etc. The results of gas dynamic and strength improvement of turbocharger TK-32 axial turbine // SIMULTECH 2014 - Proceedings of the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2014. — Vol. 2014-January. — P. 595-600

2013

• 1 MATVEEV V.N., BATURIN O.V., POPOV G.M. etc. Efficiency impruvement of a multistagae compressor by optimization stagger angles of blade rows // 4th CEAS conference. — 2013. — P. 148-148
• 2 KRIVCOV A.V., BATURIN O.V., KOLMAKOVA D.A. etc. Coupled CFD simulation of gas turbine engine core // Proceedings of the 4:th CEAS Conference in Linkoping. — 2013. — P. 719-725
• 3 MATVEEV V.N., BATURIN O.V., POPOV G.M. etc. Efficiency improvement of a multistage compressorby optimization stagger angles of blade rows // Proceedings of the 4:thCEAS Conference in Linkoping 2013. — P. 761-768