федеральное государственное автономное образовательное учреждение высшего образования
«Самарский национальный исследовательский университет имени академика С.П. Королева»

Matveev, Valeriy N.

  • Department of Aircraft Engine Theory, professor
  • leading researcher
  • Department of Aircraft Engine Theory, leading researcher
2024
  • 1 Matveev V.N., Popov G.M., Goriachkin E.S. etc. Algorithm of Forming the Appearance of the Flow Path of Turbomachinery of Two-Shaft Aircraft Engine Core // Proceedings of the 19th International Conference on Software Technologies, ICSOFT 2024. — 2024. — P. 223-228
2023
  • 1 Lyu S., Baturin O.V., Melnikov S.A. etc. Research on Thermal State Optimization of High Pressure Turbine 1st Stage Rotor Blade // Международная научно-техническая конференция имени Н.Д. Кузнецова "Перспективы развития двигателестроения". — 2023. — Vol. 2. — P. 112-113
  • 2 Volkov A., Matveev V., Baturin O. etc. Finding Recommendations for Selecting Numerical Model Settings for Efficient Simulation of the Working Process of an Axial Turbine Blade with Convective Cooling // Lecture Notes in Mechanical Engineering. — 2023. — P. 37-55
  • 3 Matveev V.N., Goriachkin E.S., Popov G.M. etc. The features of design calculation stages of parameters of flow path of cascade compressor of twin shaft gas turbine engine core on base of 1d and 2d dimensional models of their working process // Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2023. — Vol. 1. — P. 225-233
2022
  • 1 Baturin O.V., Paúl Nicolalde, Popov G.M. etc. Calculating the parameters of a gas turbine engine taking into account the uncertainty of the initial data // GPPS Xi’an21 . — 2022. —
  • 2 Popov G., Egorov I., Goriachkin E. etc. Optimization Method of the Multistage Axial Compressors Using CFD Simulation // International Journal of Computational Methods 2022. —
  • 3 Popov G.M., Volkov A.A., Baturin O.V. etc. Numerical Model of the Axial Turbine Blade Cooling Process // GPPS Xi'an21. — 2022. —
  • 4 Volkov A., Zubanov V., Matveev V. etc. Rational Settings of a Numerical Model to Simulate the Working Process of an Axial-Film-Cooled Turbine Blade // International Journal of Mechanical Engineering and Robotics Research 2022. — Vol. 11. Issue 12. № 12. — P. 901-907
2021
  • 1 Popov G.M., Zubanov V.M., Novikova Y.D. etc. A method for checking the possibility of joint work of the auxiliary power unit and the starter // Journal of Physics: Conference Series. — 2021. — Vol. 1891. Issue 1.
  • 2 Popov G.M., Volkov A.A., Kudryashov I.A. etc. Search for Rational Settings of a Numerical Model of for Studying Film Cooling in Axial Turbines // 2021 International Scientific and Technical Engine Conference (EC). — 2021. — P. 1-5
2020
  • 1 Popov G., Matveev V., Zubanov V. etc. Improving the start-up parameters of a gas turbine engine by adaptation the air turbine starter // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 904. Issue 1.
  • 2 Goriachkin E., Popov G., Baturin O. etc. Method for improving multi-stage compressor parameters using the IOSO optimizer // SIMULTECH 2020 - Proceedings of the 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2020. — P. 163-170
  • 3 Popov G., Goriachkin E., Baturin O. etc. Optimization of the workflow of multistage axial compressors using modern gas dynamics computing systems // Proceedings of the ASME Turbo Expo. — 2020. — Vol. 2D-2020.
  • 4 Popov Grigoriy Mikhaylovich, Zubanov V.M., Matveev V.N. etc. Метод согласования совместной работы воздушного стартера и вспомогательной силовой установки // Вестник ПНИПУ. Аэрокосмическая техника 2020. — № 63. — P. 5-13
2019
  • 1 Matveev V., Volkov A. A. , Zubanov V. etc. The Best Settings of Numerical Models of Axial Gas Turbines for Obtaining Reliable Results and Optimization // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 529-534
  • 2 Baturin O., Krivcov A. V. , Kolmakova D. A. etc. Modeling, Analysis and Improvement of the Input Cleaning Device of a Gas Turbine Plant for Pumping Gas // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 365-369
  • 3 Popov G.M., Matveev V.N., Zubanov V.M. etc. Selection of parameters for numerical models of the working process of axial uncooled turbines intended perform optimization and verification calculations // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —
2018
  • 1 Matveev V., Zubanov V., Shabliy L. etc. Optimization of nozzle shape of hydrogen-oxygen rocket engine // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 365-370
  • 2 Zubanov V., Volkov A. A. , Matveev V. etc. Optimization of fuel two-stage screw centrifugal pump of rocket powerful turbopump unit // Proceedings of the ASME Turbo Expo. — 2018. — Vol. 2B-2018.
  • 3 Popov G., Matveev V., Baturin O. etc. Selection of Parameters for Blade-To-blade Finite-volume Mesh for CFD Simulation of Axial Turbines // MATEC Web of Conferences. — 2018. — Vol. 220.
  • 4 Popov G., Matveev V., Baturin O. etc. Selection of Parameters for 3D Finite-volume Mesh for CFD Simulation of Axial Turbines // MATEC Web of Conferences. — 2018. — Vol. 220.
  • 5 Popov G., Matveev V., Baturin O. etc. Estimation of the effect of 3d grid parameters on the simulation of the working process of axial turbines // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 371-377
  • 6 Matveev V., Baturin O., Popov G. The Optimization of Four-Stage Low Pressure Turbine with Outlet Guide Vane // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
  • 7 Matveev V., Goriachkin E., Volkov A. A. Increase of Gas-Turbine Plant Efficiency by Optimizing Operation of Compressors // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
2017
  • 1 Matveev V.N., Shabliy L.S., Krivcov A. V. Application of stereolithography prototypes for gas dynamic tests and visualization // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
  • 2 Matveev V.N., Baturin O.V., Kolmakova D. A. etc. Gas dynamic improvement of the axial compressor design for reduction of the flow non-uniformity level // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
  • 3 Matveev V., Baturin O., Kolmakova D. A. etc. Reduction of gas flow nonuniformity in gas turbine engines by means of gas-dynamic methods // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.
  • 4 Matveev V., Novikova Y., Popov G. etc. Design and operational development a pneumatic braking system for a gas-turbine units test bench // Proceedings of the ASME Turbo Expo. — 2017. — Vol. 2B-2017.
2016
  • 1 Matveev V.N., Shabliy L.S., Krivcov A.V. etc. Методика моделирования рабочего процесса двухступенчатого насоса с гидроприводом первой ступени // Vestnik of Samara University. Aerospace and Mechanical Engineering 2016. — Vol. 15. № 4. — P. 102-113
  • 2 Zubanov V.M., Shabliy L.S., Krivcov A. V. etc. Technique for adequate CFD-modeling of the pump with hydro-drive of the low-pressure stage // Proceedings of the ASME Turbo Expo. — 2016. — Vol. 2C-2016.
2015
  • 1 Matveev V. N., Baturin O. V., Popov G. M. etc. ОПТИМИЗАЦИЯ РАБОЧЕГО ПРОЦЕССА МНОГОСТУПЕНЧАТЫХ ОСЕВЫХ ТУРБИН С БАНДАЖНЫМИ ПОЛКАМИ // Vestnik of the Samara State Aerospace University 2015. — № Том 14, № 3, ч. 2. — P. 271-283
  • 2 Matveev V.N., Popov G.M., Baturin O.V. etc. Workflow optimization of multistage axial turbine // 51st AIAA/SAE/ASEE Joint Propulsion Conference. — 2015. —
  • 3 Matveev V.N., Shabliy L.S., Krivcov A.V. Опыт применения стереолитографических моделей при газодинамических исследованиях // VESTNIK of the SAMARA STATE AEROSPACE UNIVERSITY 2015. — № Т. 14, № 3, ч.2. — P. 296-304
  • 4 Matveev V.N., Popov G.M., Baturin O.V. etc. Workflow optimization of multistage axial turbine // 51st AIAA/SAE/ASEE Joint Propulsion Conference. — 2015. —
2014
  • 1 Matveev V.N., Baturin O.V., Popov G.M. etc. Seven-stage axial compressor optimization // Engineering Optimization IV - Proceedings of the 4th International Conference on Engineering Optimization, ENGOPT 2014. — 2014. — P. 821-826
  • 2 Matveev V.N., Baturin O.V., Popov G.M. etc. The results of gas dynamic and strength improvement of turbocharger TK-32 axial turbine // SIMULTECH 2014 - Proceedings of the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2014. — Vol. 2014-January. — P. 595-600
  • 3 Matveev V.N., Popov G.M., Goryachkin E.S. etc. Effect of accounting of air bleed from the flow passage of the multi-stage axial low pressure compressor on its design performances // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 11. — P. 784-788
2013
  • 1 MATVEEV V.N., BATURIN O.V., POPOV G.M. etc. Efficiency improvement of a multistage compressorby optimization stagger angles of blade rows // Proceedings of the 4:thCEAS Conference in Linkoping 2013. — P. 761-768
  • 2 MATVEEV V.N., BATURIN O.V., POPOV G.M. etc. Efficiency impruvement of a multistagae compressor by optimization stagger angles of blade rows // 4th CEAS conference. — 2013. — P. 148-148
1987
  • 1 Matveev V.N., Tikhonov N.T., Trofimov A.A. INFLUENCE OF STATOR INTERBLADE PASSAGE AXIS INCLINATION ON EFFICIENCY OF CENTRIPETAL MICROTURBINE WITH FULL WORKING FLUID ADMISSION. // Sov Aeronaut 1987. — Vol. 30. Issue 2. — P. 104-108
  • 2 Tikhonov N.T., Matveev V.N. EXPERIMENTAL STUDY OF INFLUENCE OF UPPER AND LOWER OVERLAP MAGNITUDES ON EFFICIENCY OF RADIAL CENTRIPETAL MICROTURBINES WITH SHROUDED ROTOR. // Sov Aeronaut 1987. — Vol. 30. Issue 4. — P. 120-123
1984
  • 1 Tikhonov N.T., Tikhonov A.N., Matveev V.N. EXPERIMENTAL DETERMINATION OF OPTIMAL RADIAL CENTRIPETAL MICROTURBINE ROTOR BLADE EXIT AND ENTRANCE HEIGHT RATIO. // Sov Aeronaut 1984. — Vol. 27. Issue 1. — P. 45-48
  • 2 Matveev V.N., Tikhonov N.T., Trofimov A.A. INFLUENCE OF STATOR CASCADE SOLIDITY ON FULL-ADMISSION CENTRIPETAL MICROTURBINE EFFICIENCY. // Sov Aeronaut 1984. — Vol. 27. Issue 3. — P. 65-69
1982
  • 1 Tikhonov N.T., Matveev V.N. RATIONAL APPLICATION OF MICROTURBINES WITH WORKING FLUID READMISSION. // Sov Aeronaut 1982. — Vol. 25. Issue 3. — P. 93-98