Kolmakova, Daria A.

2022

• 1 Popov G., Egorov I., Goriachkin E. etc. Optimization Method of the Multistage Axial Compressors Using CFD Simulation // International Journal of Computational Methods 2022. —

2020

• 1 Popov G., Zubanov V., Baturin O. etc. Optimization of an air turbo starter considering its joint work with an auxiliary power unit // Proceedings of the ASME Turbo Expo. — 2020. — Vol. 2C-2020.
• 2 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Optimization algorithm for axial multistage compressor workflow // AIAA Propulsion and Energy 2020 Forum. — 2020. — P. 1-11
• 3 Popov G., Baturin O., Zubanov V. etc. Optimization of a single-stage air starter turbine // SIMULTECH 2020 - Proceedings of the 10th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2020. — P. 155-162
• 4 Popov G., Matveev V., Zubanov V. etc. Improving the start-up parameters of a gas turbine engine by adaptation the air turbine starter // IOP Conference Series: Materials Science and Engineering. — 2020. — Vol. 904. Issue 1.

2019

• 1 Baturin O.V., Kolmakova D. A. , Krivtsov A.V. etc. Estimation of the hydraulic losses in the inlet shaft of a land-based gas turbine // ASME 2019 Gas Turbine India Conference, GTINDIA 2019. — 2019. — Vol. 2.
• 2 Popov G.M., Matveev V.N., Zubanov V.M. etc. Selection of parameters for numerical models of the working process of axial uncooled turbines intended perform optimization and verification calculations // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —
• 3 Baturin O., Kolmakova D. A. , Krivcov A. V. etc. Estimation of the hydraulic losses in the work shaft of a gas turbine engine of a gas compressor unit under various operating conditions // AIAA Propulsion and Energy Forum and Exposition, 2019. — 2019. —
• 4 Baturin O., Kolmakova D. A. , Popov G. etc. Reducing the hydraulic resistance in the inlet device of the gas turbine unit // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 88-99
• 5 Marchukov E., Egorov I., Popov G. etc. Creating a multi-level model of a centrifugal compressor for a digital analogue of the gas turbine engine // IOP Conference Series: Materials Science and Engineering. — 2019. — Vol. 604. Issue 1.
• 6 Popov G., Baturin O., Volkov A. A. etc. The influence of the level of the flow path blockage at the inlet on the fan characteristics // SIMULTECH 2019 - Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2019. — P. 247-254
• 7 Baturin O., Krivtsov A., Kolmakova D. A. etc. Estimation of the hydraulic losses in the work shaft of a gas turbine engine of a gas compressor unit under various operating conditions // Proceedings of the ASME Turbo Expo. — 2019. — Vol. 3.
• 8 Baturin O., Krivcov A. V. , Kolmakova D. A. etc. Modeling, Analysis and Improvement of the Input Cleaning Device of a Gas Turbine Plant for Pumping Gas // Proceedings - 2019 21st International Conference "Complex Systems: Control and Modeling Problems", CSCMP 2019. — 2019. — Vol. 2019-September. — P. 365-369

2018

• 1 Baturin O., Popov G., Kolmakova D. A. etc. Optimization of Powerful Two-stage Screw Centrifugal Pump // MATEC Web of Conferences. — 2018. — Vol. 220.
• 2 Popov G., Matveev V., Baturin O. etc. Estimation of the effect of 3d grid parameters on the simulation of the working process of axial turbines // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 371-377
• 3 Filinov E., Kolmakova D. A. , Avdeev S. etc. Correlation-regression models for calculating the weight of small-scale aircraft gas turbine engines // MATEC Web of Conferences. — 2018. — Vol. 220.
• 4 Kolmakova D. A. , Popov G. Gas-Dynamic Methods to Reduce Gas Flow Nonuniformity from the Annular Frames of Gas Turbine Engines // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.
• 5 Popov G., Matveev V., Baturin O. etc. Selection of Parameters for 3D Finite-volume Mesh for CFD Simulation of Axial Turbines // MATEC Web of Conferences. — 2018. — Vol. 220.
• 6 Baturin O., Kolmakova D. A. , Popov G. etc. Improving the characteristics of two-stage fuel pump by optimizing the blades geometry // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 357-364
• 7 Ermakov A., Popov G., Kolmakova D. A. etc. Strategy for reduction of the negative effects of circumferential flow irregularity in axial compressor // SIMULTECH 2018 - Proceedings of 8th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2018. — P. 144-150
• 8 Tkachenko A., Filinov E., Ostapyuk Y. etc. Thermodynamic designing of the small-scale gas turbine engine family with common core // MATEC Web of Conferences. — 2018. — Vol. 220.
• 9 Baturin O., Kolmakova D. A. Development of A New Equations Describing Profile Losses in Axial Turbine Blade Row // IOP Conference Series: Materials Science and Engineering. — 2018. — Vol. 302. Issue 1.

2017

• 1 Popov G.M., Baturin O.V., Goriachkin E.S. etc. Increasing the efficiency of the axial low pressure compressor in three operation modes by optimizing the shape of its blades // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 2 Baturin O., Popov G., Novikova J. etc. Strength and gas dynamic methods of development of axial turbine turbocharger // 2017 International Conference on Mechanical, System and Control Engineering, ICMSC 2017. — 2017. — P. 44-47
• 3 Marchukov E.Yu., Egorov I., Popov G. etc. Multidisciplinary optimization of the working process of uncooled axial turbine according to efficiency and strength criteria // Proceedings of the ASME Turbo Expo. — 2017. — Vol. 2C-2017.
• 4 Matveev V.N., Baturin O.V., Kolmakova D. A. etc. Gas dynamic improvement of the axial compressor design for reduction of the flow non-uniformity level // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 5 Baturin O.V., Popov G.M., Kolmakova D. A. etc. The best model for the calculation of profile losses in the axial turbine // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 6 Marchukov E., Egorov I., Popov G. etc. Improving of the working process of axial compressors of gas turbine engines by using an optimization method // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.
• 7 Baturin O.V., Popov G.M., Kolmakova D. A. etc. Strength and gas dynamic methods of development of the axial turbine turbocharger // Journal of Physics: Conference Series. — 2017. — Vol. 803. Issue 1.
• 8 Matveev V., Baturin O., Kolmakova D. A. etc. Reduction of gas flow nonuniformity in gas turbine engines by means of gas-dynamic methods // IOP Conference Series: Materials Science and Engineering. — 2017. — Vol. 232. Issue 1.

2016

• 1 Kolmakova D.A., O. V. Baturin Impact of Geometric Uncertainties on the Results of Numerical Simulation of Axial Turbine Operation // The Fourth International Academic Conference for Graduates. — 2016. — Pt. 2. — P. 44-49
• 2 Baturin O., Kolmakova D. A. , Gorshkov A. etc. Generation of the equations for the profile losses calculation in blade row of axial turbines in design analysis // Proceedings of the ASME Turbo Expo. — 2016. — Vol. 2C-2016.
• 3 Popov G., Goriachkin E., Kolmakova D. A. etc. Multicriteria optimization of axial low pressure compressor of gas turbine power plant // Proceedings of the ASME Turbo Expo. — 2016. — Vol. 2C-2016.
• 4 Kolmakova D. A. , Popov G., Shklovec A. O. etc. Rational design of gas turbine engine compressor to provide the required dynamic strength level of rotor blades // Proceedings of the ASME Turbo Expo. — 2016. — Vol. 7A-2016.

2015

• 1 Kolmakova D. A. , Popov G. Methods of improving the axial compressor flow passage to reduce the flow circumferential nonuniformity // ASME 2015 Gas Turbine India Conference, GTINDIA 2015. — 2015. —
• 2 Baturin O., Kolmakova D. A. , Gorshkov A. etc. Selection of models to assess the profile losses in blade rows using the methods of mathematical statistics // ASME 2015 Gas Turbine India Conference, GTINDIA 2015. — 2015. —
• 3 Matveev V.N., Popov G.M., Baturin O.V. etc. Workflow optimization of multistage axial turbine // 51st AIAA/SAE/ASEE Joint Propulsion Conference. — 2015. —
• 4 Popov G., Kolmakova D. A. , Shklovec A. O. etc. Optimization of the axial compressor flow passage to reduce the circumferential distortion // IOP Conference Series: Materials Science and Engineering. — 2015. — Vol. 90. Issue 1.
• 5 Goryachkin E., Baturin O., Popov G. etc. Three-stage low pressure compressor modernization by means of optimization methods // Proceedings of the ASME Turbo Expo. — 2015. — Vol. 2C.
• 6 Popov G.M., Kolmakova D. A. , Shklovec A. O. Angular arrangement optimization of the support racks of gas turbine engine to reduce the circumferential unevenness of gas flow // SIMULTECH 2015 - 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Proceedings. — 2015. — P. 383-388
• 7 Kolmakova D. A. , Popov G., Baturin O. etc. The quantification of impact of geometrical and operational parameters uncertainty on the numerical simulation results of axial turbine working process // Proceedings of the ASME Turbo Expo. — 2015. — Vol. 2B.
• 8 Matveev V.N., Popov G.M., Baturin O.V. etc. Workflow optimization of multistage axial turbine // 51st AIAA/SAE/ASEE Joint Propulsion Conference. — 2015. —

2014

• 1 Ermakov A.I., Shklovec A. O. , Popov G.M. etc. Investigation of the effect of the gas turbine compressor supports on gas flow circumferential nonuniformity // Research Journal of Applied Sciences 2014. — Vol. 9. Issue 10. — P. 684-690
• 2 Matveev V.N., Baturin O.V., Popov G.M. etc. The results of gas dynamic and strength improvement of turbocharger TK-32 axial turbine // SIMULTECH 2014 - Proceedings of the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2014. — Vol. 2014-January. — P. 595-600
• 3 Popov G.M., Baturin O.V., Kolmakova D. A. etc. Improvement results of TK-32 turbocompressor turbine with gas-dynamics and strength CAE-systems // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2297-2303
• 4 Popov G.M., Shklovec A. O. , Ermakov A.I. etc. Methods to reduce the resonant stresses level of gas turbine engines compressor rotor wheels // SIMULTECH 2014 - Proceedings of the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications. — 2014. — Vol. 2014-January. — P. 619-624
• 5 Kolmakova D. A. , Popov G., Shklovec A. O. etc. Techniques and methods to improve the dynamic strength of gas turbine engines compressor rotor wheels // ASME 2014 Gas Turbine India Conference, GTINDIA 2014. — 2014. —
• 6 Kolmakova D. A. , Baturin O., Popov G. Effect of manufacturing tolerances on the turbine blades // In Proceedings of the ASME 2014 Gas Turbine India Conference GTINDIA2014. — 2014. —
• 7 Popov G.M., Goryachkin E.S., Baturin O.V. etc. Development of recommendations on building of the lightweight calculation mathematical models of the axial turbines of gas turbine engines // International Journal of Engineering and Technology 2014. — Vol. 6. Issue 5. — P. 2236-2243
• 8 Kolmakova D. A. , Baturin O.V., Popov G.M. Knowledge lack impact assessment of the source date on numerical simulation results of operational process in axial flow turbine blade row // ARPN Journal of Engineering and Applied sciences 2014. — Vol. 9. Issue 12. — P. 2880-2889

2013

• 1 KRIVCOV A.V., BATURIN O.V., KOLMAKOVA D.A. etc. Coupled CFD simulation of gas turbine engine core // Proceedings of the 4:th CEAS Conference in Linkoping. — 2013. — P. 719-725